News

Latest News from PGS Training

Proactive Gas Safety, training options during covid-19

29 June, 2020

Proactive Gas Safety, training options during Covid-19 As with many training organisations and businesses, all Proactive Gas Safety training activity ground to a sudden halt on 18th March 2020. The initial lockdown period was a shock to us all and it was a troubling time, thankfully all PGS staff and families have remained safe and …

Proactive Gas Safety, training options during covid-19 Read More »

Other Recent News

Gas Cylinders in Fires – Guidance from the BCGA

28 September, 2017

Gas Cylinders in Fires – What you Should Know Gas cylinders are designed to contain gases under pressure. However,  cylinders are at risk of failure and may rupture due to the combined effects of increasing pressure and weakening of the cylinder wall when exposed to extreme heat – therefore it is important that users understand how to respond in the event of a fire. Operator actions in the event of an emergency Isolate the leak by turning off the cylinder valve Control the fire using a dry powder fire extinguisher If a gas cylinder is involved in a fire: Do […]

Read More

Gas Bottle Storage

10 July, 2017

The safe storage of gas cylinders is the starting point to working safely with compressed gases To assist in the day to day management of your gas store PGS have created ‘Know Your Stores’ available to download as a PDF and to purchase from our shop. For those tasked with the planning and construction of a compressed gas cylinder storage facility, best practice guidance can be found in BCGA GN2, as summarised below. Location Access for emergency services Heavier than air gases 3 metres from pits and drains Lighter than air gases 3 metres from air intake Indoor stores are not […]

Read More

Helen’s Sahara Trek for St Luke’s Hospice

4 July, 2017

Helen’s Trek Sahara Challenge In October 2017 PGS commercial director Helen Brewin will take on a 50km Sahara Trek raising funds for our local hospice, St Luke’s in Winsford, Cheshire. Helen decided to take on the challenge in memory of her Dad who passed away last year.  In addition, Helen wanted to set herself a challenge in her 60th year St Luke’s hospice provides palliative care and support to around 1000 people each year.  80% of the care provided comes from from donations. PGS are one of a number of local businesses who regulatory support the hospice. You can read more about Helen’s adventure […]

Read More

Oxy-fuel gas safety training and practical cutting for the automotive industry.

10 November, 2016

Halfords Autocentres and PGS Training Oxy-fuel gas safety training and practical cutting for the automotive industry. Earlier this year PGS were delighted to win a contract to deliver training to 750+ Halfords Autocentre Colleagues. PGS were uniquely placed to deliver nationally accredited gas safety training for users of oxy-fuel gases (oxygen & acetylene) and equipment including practical cutting skills to a large number of delegates in a very tight timescale A project of this size requires careful management from both parties. Working together, PGS and Halfords Autocentres overcame a number of practical and logistic difficulties to ensure over 75 courses […]

Read More

Understanding regulator date codes

3 June, 2016

Regulator Date Codes In order to comply with best practice it is necessary to replace your pressure regulator at least 5 years after manufacture, or in accordance with manufacturer’s recommendations. Although manufacturers and suppliers of regulators are not required to date mark regulators many adopt the best practice of doing so. Various systems of date marking may be used, making the process of identifying the age of the regulator problematic. Other equipment typically covered by BCGA codes of practice which should be changed at least every 5 years include flashback arrestors and high pressure flexible hoses used in mobile or […]

Read More

Proactive Gas Safety, training options during covid-19

29 June, 2020

Proactive Gas Safety, training options during Covid-19 As with many training organisations and businesses, all Proactive Gas Safety training activity ground to a sudden halt on 18th March 2020. The initial lockdown period was a shock to us all and it was a troubling time, thankfully all PGS staff and families have remained safe and […]

Thorough examination and Testing of Equipment during Covid-19

11 April, 2020

The HSE have issued advice to companies who have plant & equipment which requires Thorough Examination and Testing (TE&T). Where a company has a duty to carry out TE&T, the HSE’s approach during the Covid-19 outbreak will be pragmatic. If it is not possible for a scheduled examination or inspection to take place, you should […]

New Course for 2020 – CP47 Single Cylinder Inspection Module

5 December, 2019

CP47 Single Cylinder Inspection Module Successful completion of this module will enable operators to carry out inspections on individual cylinders and mobile pressure equipment. BCGA CP47 states that it is essential that at least an annual inspection is carried out on individual portable or mobile pressure equipment. All delegates will receive instruction on the correct […]

Safety in the Workplace – The Human Factor

4 July, 2019

Safety in the Workplace – The Human Factor Human Factors can play a huge part in accidents and near misses within the workplace. When it comes to the safe use of compressed gases, effective training and the sharing of information play a crucial role in reducing risks caused by Human Factors. In the UK we […]

Welding Fume Control

5 March, 2019

Safety Alert from the HSE The Workplace Health Expert Committee has endorsed the reclassification of mild steel welding fume as a human carcinogen. This is because there is new scientific evidence that exposure to all welding fume, including mild steel welding fume, can cause lung cancer. There is also limited evidence linked to kidney cancer. […]

Safe Use of Single Gas Cylinders

14 November, 2018

Working safely with gas cylinders Whilst gas cylinders are common place in many working environments it is important not to become complacent about the potential hazards of such cylinders.  There are a number of safety issues that should be addressed to maintain a safe working environment. For example an average Argon cylinder weighs approximately 95kg, […]

CP7 Gas Equipment Inspector courses in partnership with ESAB

20 June, 2018

PGS are delighted to partner with ESAB, to deliver Oxy-Fuel CP7 Gas Equipment Inspector courses “ESAB are highly respected within the welding industry and their inspector course has long been recognised as a leading training solution for gas inspectors.PGS are therefore delighted to be offered the opportunity, to take over the reins and deliver our […]

Date marking of gas accessories

9 May, 2018

BCGA issue TIS 18 Revision 3: 2018 – Date marking of gas accessories Gas equipment will age and deteriorate over time, regardless of the external appearance, internal components such as rubber valves and seals will deteriorate from the time of manufacture. It is for this reason that regular equipment inspections are required. TS18 refers to […]

Flashback Arrestors Standard Update

8 May, 2018

Flashback Arrestors (FBA) Gas Welding Equipment Safety Devices incorporating a flame (flashback) arrestor BS EN 730-1:2002 has been replaced by BS EN ISO 5175-1:2017 Flashback Arrestors purchased from 2018 may now be seen with the new number ISO 5175-1 5 Year Life Replace Flashback Arrestors every 5 years or according to manufacturer’s recommendations Check the […]

Proactive Gas Safety on show…

18 April, 2018

The Health & Safety Event 2018 What an exciting week week for Proactive Gas Safety… Following on from the success of 2017’s stand, we exhibited again at the Health and Safety Event NEC from 10-12th April. It was great to meet and chat with safety professionals from the industry, meet up with familiar faces and […]

Compressed gases in an enclosed space

26 February, 2018

The management of risk when using compressed gases in enclosed workplaces. Guidance Note 11 – Revision 4: 2018 from the British Compressed Gases Association This publication provides guidance that can be used in the assessment of risk associated with gases in enclosed workplaces. To help identify where hazardous atmospheres may occur and to advise on […]

Gas Cylinders in Fires – Guidance from the BCGA

28 September, 2017

Gas Cylinders in Fires – What you Should Know Gas cylinders are designed to contain gases under pressure. However,  cylinders are at risk of failure and may rupture due to the combined effects of increasing pressure and weakening of the cylinder wall when exposed to extreme heat – therefore it is important that users understand […]

Gas Bottle Storage

10 July, 2017

The safe storage of gas cylinders is the starting point to working safely with compressed gases To assist in the day to day management of your gas store PGS have created ‘Know Your Stores’ available to download as a PDF and to purchase from our shop. For those tasked with the planning and construction of a […]

Helen’s Sahara Trek for St Luke’s Hospice

4 July, 2017

Helen’s Trek Sahara Challenge In October 2017 PGS commercial director Helen Brewin will take on a 50km Sahara Trek raising funds for our local hospice, St Luke’s in Winsford, Cheshire. Helen decided to take on the challenge in memory of her Dad who passed away last year.  In addition, Helen wanted to set herself a challenge in […]

Oxy-fuel gas safety training and practical cutting for the automotive industry.

10 November, 2016

Halfords Autocentres and PGS Training Oxy-fuel gas safety training and practical cutting for the automotive industry. Earlier this year PGS were delighted to win a contract to deliver training to 750+ Halfords Autocentre Colleagues. PGS were uniquely placed to deliver nationally accredited gas safety training for users of oxy-fuel gases (oxygen & acetylene) and equipment […]

Understanding regulator date codes

3 June, 2016

Regulator Date Codes In order to comply with best practice it is necessary to replace your pressure regulator at least 5 years after manufacture, or in accordance with manufacturer’s recommendations. Although manufacturers and suppliers of regulators are not required to date mark regulators many adopt the best practice of doing so. Various systems of date […]

Scroll to Top